Audley End Outdoor Pendant Hand-brushed Black/Gold and Glass IP44
Measurements: H min45 - max98 x Ø18cm
Height is adjustable at the point of installation (45-98cm).
Bulb not included; takes 1 x 35W max ES GLS. We recommend our BUL-E27-LED-16 bulb. Click here to shop.
Although this outdoor light has been designed for outdoor environments and tested to IP44 standards, it is unsuitable for harsh coastal environments, including any area with salty air conditions. Installing in a coastal or harsh environment may mean the finish of this light degrades much more quickly and cannot be covered under warranty. This light should not be installed on surfaces that could contain corrosive substances, including lime-based renders or paint.
Don't understand technical jargon? View our useful Lighting Glossary
- Measurements H min45 - max98 x Ø18cm
- Finish Matt Black Gold,Glass
- Material Glass, Metal
- Cable Material Black
- Symbols EHd
- Suitable For Outdoor, Bathroom Zones 1 & 2
- Electrical Class Class 1 - Earthed
- Shade Included Not Required
- Primary Light:
- Lamp 1 x 35w max ES GLS
- Recommended Lamp BUL-E27-LED-16
Useful to Know
Are the light bulbs included?
No these have to be bought separately, this allows you the opportunity to choose the colour temperature 2700k for a warm inviting feel, most people use this in the lounge or bedroom or 4000k for a more crisp white, most people use this in the kitchen or study but it's a personal preference. We have a range of highly efficient LED filament lamps, most are dimmable when using an LED compatible dimmer. Take a look at our LED Lamps for the full range.
What colour is the cable?
The cable is Black.
Is this light dimmable?
This light can be used with a dimmer when dimmable bulbs are installed (available separately). Always check the compatibility of the dimmer and light bulbs.
Is this fitting suitable for the Outdoor use?
Yes this fitting is IP44 rated, and is suitable for outdoor use.
I live near the coast, is this light suitable?
Unfortunately, the harsh salty air of the coastal environment is very corrosive and will degrade the finish of this product very quickly. We recommend you look for products designed for coastal environments.
Can I use this light on a rendered wall?
This depends. Some renders use lime or other corrosive material that remains active during their life. The slight corrosive nature of lime will degrade the finish of this product. For normal concrete or silicate-based renders, please ensure they are fully cured before installing and wipe off any dust that may land on the surface of the product, as the curing reaction of some renders can damage the finish. Once fully cured, these should be fine.
