Munich Rechargeable Outdoor Table Lamp IP54
Measurements: H38 x Ø11cm
Constructed from strong die-cast aluminium and finished in a tough powder-coat finish, this lantern will not rust. Tested to IP54 standard to withstand water spray it's fine to leave out in the rain but can't be submerged in water or pressure washed. (This product can only be recharged indoors once fully dry). The internal lithium batteries are non user-replaceable.
The Munich features an integrated LED light source; 1 x 2w LED inc | 190 lumens | 3000k
Although this outdoor light has been designed for outdoor environments and tested to IP54 standards, it is unsuitable for harsh coastal environments, including any area with salty air conditions. Installing in a coastal or harsh environment may mean the finish of this light degrades much more quickly and cannot be covered under warranty. This light should not be installed on surfaces that could contain corrosive substances, including lime-based renders or paint.
Don't understand technical jargon? View our useful Lighting Glossary
- Measurements H38 x Ø11cm
- Finish Matt Black
- Material Metal
- Cable Material White
- Nett Weight (kg) 1.103 kg
- Symbols 3TgLu
- Suitable For Outdoor, Bathroom Zones 1 & 2
- Electrical Class Class 3 - Low Voltage
- Shade Included Not Required
- Primary Light:
- Lamp 1 x 2w LED inc | 190 lumens | 3000k
- Lumens 190
- Efficiency 95
- Colour Temperature 3000
- Colour Rendering 80 Ra
Useful to Know
What colour is the cable?
The cable is White.
Is this light dimmable?
No. This LED light is not suitable for dimming and should not be used with a dimmer switch.
Is this fitting suitable for the Outdoor use?
Yes this fitting is IP54 rated, and is suitable for outdoor use.
I live near the coast, is this light suitable?
Unfortunately, the harsh salty air of the coastal environment is very corrosive and will degrade the finish of this product very quickly. We recommend you look for products designed for coastal environments.
Can I use this light on a rendered wall?
This depends. Some renders use lime or other corrosive material that remains active during their life. The slight corrosive nature of lime will degrade the finish of this product. For normal concrete or silicate-based renders, please ensure they are fully cured before installing and wipe off any dust that may land on the surface of the product, as the curing reaction of some renders can damage the finish. Once fully cured, these should be fine.